Adjusting bottom thread tension

Duration: 13min 35sec Views: 754 Submitted: 08.09.2020
Category: School
You may need to change the thread tension, depending on the fabric and thread being used. To achieve attractive results when sewing your project, correct tension is an important point. Too much or too little tension will weaken your seams or cause puckers on your fabric. The upper thread and the bobbin thread should cross near the center of the fabric. Only the upper thread should be visible from the right side of the fabric, and only the bobbin thread should be visible from the wrong side of the fabric. For the trial sewing, use a piece of fabric and thread that are the same as those used for your project.

Dealing with common thread tension issues

Dealing with common thread tension issues - The Sewing Directory

Last Updated: February 2, References. This article was co-authored by Daniela Gutierrez-Diaz. With over 5 years of experience, Daniela creates modern and unique silhouettes that are suitable for a busy everyday life. This article has been viewed , times.

BOBBIN TENSION Guide

Sometimes quilters are hesitant to adjust sewing machine tension when stitches aren't quite right because they are unsure if the adjustments will create even more of an issue. Don't hesitate to make tension adjustments because they're often necessary. Sewing machine tension adjustment is controlled by devices that separately control the needle thread and the bobbin thread, putting varying amounts of tension or strength on the threads they control to form a strong, balanced stitch.
As an Amazon Associate I earn from qualifying purchases at no additional cost to you. Tension setting on a sewing machine requires a little more than just adjusting the presser foot tension. Sewing machine bobbin tension plays an important part too and changing bobbin tension is crucial for the success of all sewing projects!